Fireware Upgrade - Austin Hughes Electronics Cyberview NCP-1716 User Manual

6.3 Fireware Upgrade

6.3.2 Upgrade from web page
If you want to run the new firmware, you need to click the Reboot item, then Yes to confirm to reboot the system. It
will take about one minute to finish the system reboot. When the IPCS unit finishes the startup and working normally,
the Ready green LED will blink every second.
Warning :
A new firmware release version may need one, two, or up to three images to upgrade. You have to up-
grade all to be upgraded images before rebooting the system. Otherwise may cause inconsistency be-
tween kernel and application firmware and the system may not be able to start up successfully. In this
case, we have to upgrade through bootloader process, which is not as friendly as the web method.
P.47
Chapter 6