System Status & Log - Austin Hughes Electronics Cyberview NCP-1716 User Manual

5.1 System Status & Log
5.1.1 System Status
System status data include the model name, serial number, firmware version, bootloader version, current time,
and the network configuration of the IP serial console. User cannot change the data from this page.
This page will be automatically refreshed every 10 seconds, to show the system current time.
5.1.2 System Logging
The user may configure the IP serial console to enable or disable the system logging process and set the storage
location. The system log buffer is pre-allocated at 300K bytes size. If the logging data grows larger than the
pre-allocated size, the new data will overwrite the old data.
P.42
Chapter 5