Austin Hughes Electronics Cyberview NCP-1716 User Manual page 42

4.1 Serial Port Confi guration
4.1.5 Serial Port Parameters
To connect the serial device to the IPCS serial port, the serial port parameters of the IPCS should match
exactly to that of the serial device attached.
4.1.6 Port Logging
With the Port logging feature while in console server mode, the data receiving from the tracking serial port
will be buffered in IPCS memory. The user can also define keywords for each serial port that will trigger an
email notification if the keyword is found in the logged data. This will enable the user to monitor the data from
the attached device. The Port logging feature is valid and visible only if the operation mode of the serial port is
configured to console server mode.
P.38
Chapter 4