Command Guide - Austin Hughes Electronics Cyberview NCP-1716 User Manual

2.7 Command Guide

Commands Supported in ASCII Personalities
Below table lists all the ASCII commands recognized by the terminal. The native mode code for the com-
mand is given in the second column. (The native mode include WY-325,WY-120 and WY-60.) The remaining
columns show the support for the command in other ASCII personalities according to the following notations:
Same -
Wyse -
ENH -
A code listed under a nonnative personality indicates that the related terminal's native code is supported.
A blank in any column indicates that the command is not supported.
Variables are shown in italics. Their values are listed in alphabetical order at the end of the table.
Same as native code (code is native to other terminal also)
Same as native code (Wyse enhancement- code not native to other terminal)
Same as native code when enhance mode is on
(Wyse enhancement - code not native to other terminal)
P.26
Chapter 2