2.2 Membrane
Power ON
■
Turn off all devices / servers and Cat5 IP serial console
■
Make sure all cables / connectors are properly connected
Front Panel - Port LED Indications
16 ports
Power
Link
Ready
Port LED
Reset button
Warning :
Press "Shift+Esc" sets default, it will change the pre-set operating parameters and local access "Per-
sonality", Please refer to FAQ (page 29-30) for detailed setting.
Port activity
Red:
Power on indication
Orange: 10BaseT Etherent connection
Green:
100BaseT Ethernet connection
Green:
Blinking per second when system is busy
Green:
Traffi c activity
Press reset button to reboot the unit
P.12
Chapter 2
Status LEDs
Reset button