Table of Contents
Advertisement
SDD ES ETH
Option
INPUT2
Coding
TeachIn free
Temp °C
Act.#
Ident#
SN#
(*1)
Value on restart
Device Event menu
Device Event
Option
Web server
A web server is implemented in the fieldbus module SDD ES ETH. This can be used to poll
data from the SDD.
}
The web server is started once the SDD ES ETH is connected to the supply voltage.
}
The web server is intended for use with Internet Explorer or Firefox.
}
Make sure that Javascript and Cookies are enabled in your browser's security settings.
Start of the web server
1. Connect the SDD ES ETH to the PC.
2. Call up the HTML page:
–
–
3. Enter the user name and password correctly and log on to the web application.
4. Select the option you require in the overview and then follow the instructions.
Operating Manual SDD ES ETH
1003824-EN-06
Value range
/
C, F, U
1-8
Event Nr. x
Device x
Message # x
http://192.168.0.xxx
For xxx, enter the value that you have set as the last byte of the IP address.
Meaning
Status Input 2
(*1)
Pilz coding type
C = coded, F = fully coded, U = uniquely fully coded
Number of teach-in processes remaining
Temperature of a safety device in °C. The temper-
ature of one safety device is updated every two
minutes; with 16 safety devices, for example, the
temperature of the first safety device is updated
every 32 minutes.
Actuator short name
Material number of safety device
Serial number of safety device
Meaning
Display of consecutive event numbers (event num-
ber is incremented up to 150 and then the oldest
number is overwritten)
Number of device
Display of a message or message number (the
messages are described in detail
for safety device diagnostics [
(*1)
(*1)
(*1)
under Messages
28])
| 23
Advertisement
Table of Contents
