Table of Contents
Advertisement
SDD ES ETH
Safety
Intended use
The SDD ES ETH is used for communication between connected safety devices and the
Modbus/TCP. The Modbus/TCP is designed for data exchange at field level. The SDD ES
ETH operates as the Server; a connected control system operates as the Client.
Application of the product SDD ES ETH:
}
Evaluate and display diagnostic data and status information from safety devices
}
Connect safety devices and Modbus/TCP
}
Processing and display of safety device data
}
Transfer diagnostic data and status information from the safety devices to Modbus/TCP
Appropriate safety devices are listed in the document "System Description Safety Device
Diagnostics".
The SDD ES ETH may not be used for safety-related functions.
Safety-related functions of the safety devices have to be evaluated separately by a safe
evaluation device.
The following is deemed improper use in particular
}
Any component, technical or electrical modification to the product,
}
Use of the product outside the areas described in this manual,
}
Use of the product outside the technical details (see
Operating Manual SDD ES ETH
1003824-EN-06
NOTICE
EMC-compliant electrical installation
The product is designed for use in an industrial environment. The product
may cause interference if installed in other environments. If installed in other
environments, measures should be taken to comply with the applicable
standards and directives for the respective installation site with regard to in-
terference.
Technical details [
32]).
| 8
Advertisement
Table of Contents
