System Structure; Set Ip Address - Pilz SDD ES ETH Operating Manual

SDD ES ETH

System structure

Set IP address

When setting the IP address, please note:
} The IP address for the fieldbus module SDD ES ETH should not be the same as the PC's
IP address.
The following different options are available for setting the IP address.
Obtain IP address automatically via DHCP Server
The IP address can be assigned automatically via a DHCP Server
In order to do this, DHCP must be activated on the fieldbus module SDD ES ETH.
} DHCP is already activated when the module is delivered. The IP address is obtained
automatically from the DHCP server. The module waits to receive an address from a
DHCP Server.
Operating Manual SDD ES ETH
1003824-EN-06
I1 (FS)
Evaluation device
FS = Failsafe
I2 (FS)
Ethernet
PNOZ m ES ETH
Signal inputs and outputs
from other devices
PSEN Y PSEN Y
Junction Junction
Safety Device Safety Device
FE
0 V
24 V
Safety Device
| 16