Pilz SDD ES ETH Operating Manual page 27

SDD ES ETH
Firmware update
The firmware and the web server of SDD ES ETH can be updated.
1. Set the IP address of the configuration PC to the address range of the SDD ES ETH
(e.g. 192.168.0.1).
To access SDD ES ETH, the IP address of the PC has to be in the same subnet as the
IP address of SDD ES ETH
Change the IP address in the network settings of your configuration PC or change the
IP address of the SDD ES ETH (see Set IP address).
2. Establish an FTP connection to the Gateway, using the user name "Admin" and pass-
word "0000".
3. Copy the file "SDD_xxx.kfu" and the directory "web" with FTP to the SDD ES ETH and
save the files in the topmost directory.
4. Perform a
opted.
Operating Manual SDD ES ETH
1003824-EN-06
restart [ 20] of SDD ES ETH. The changed configuration is therefore ad-
| 27