Menu Settings - Pilz SDD ES ETH Operating Manual

SDD ES ETH

Menu settings

GPIO-Mapping
Value range
PLC
1-16
IP Config.
Option
DHCP
IP Address
Netmask
Gateway Addr.
Restart
Info
Option
Operating Manual SDD ES ETH
1003824-EN-06
Value range
On / Off
xxx.xxx.xxx.xxx
255.255.255.xxx
xxx.xxx.xxx.xxx
IP Address:
Ver:
SVN:
SN:
Meaning
Value is set by control system
1-16 represents a connected safety device. If the
actuator enable is set for this safety device, the
GPIO is set to 24 V.
If the value ≠ PLC, the control system has no ac-
cess to the input/output channel.
Meaning
DHCP status (status when delivered = On)
Changes will only take effect when SDD ES ETH is
restarted.
Display or change the set IP address (xxx = 1 to
255)
Changes will only take effect when SDD ES ETH is
restarted.
Display or change the set subnet mask
Changes will only take effect when SDD ES ETH is
restarted.
Display or change the set Gateway address
Changes will only take effect when SDD ES ETH is
restarted.
Trigger a restart of the SDD ES ETH in order to ad-
opt the amended IP configuration settings.
Meaning
Current IP address setting
Product version
Software version
Serial number of safety device
| 20