Table of Contents
Advertisement
PIT es Set10u-5ns
Device features
}
E-STOP device in accordance with EN 60204-1, EN ISO 13849, EN ISO 13850 and EN
60947-5-5, contacts in accordance with EN 60947-5-1
}
Clear visual display when E-STOP function is active
}
In inactive state, the E-STOP pushbutton is not lit and it can no longer be detected as an
E-STOP
}
Turn in either direction to release
}
Bevelled protective collar
}
Integral flashing function of the yellow bevelled protective collar after operating the E-
STOP pushbutton
}
Connection to an evaluation device via 5-pin M12 connector
}
Housing can be divided diagonally, the actuation direction can therefore be changed by
rotated installation, if required.
}
The device can be clipped to the mounting plate in 90 ° steps
}
Integral manipulation protection, the device cannot be disconnected in installed state un-
less the upper part of the housing is removed.
Marking on E-STOP pushbutton
Legend
[1] Order number
[2] Date of manufacture mmyy
[3] Serial number
Operating Manual PIT es Set10u-5ns
1004426-EN-01
[1]
[2]
[3]
| 7
Advertisement
Table of Contents
