Table of Contents
Advertisement
SDD ES ETH
Operate menu
The menu settings are made on the device's display via a multifunction switch. You can
switch between the menu levels by pressing or rotating the multifunction switch.
Press multifunction switch
}
Confirm selection/setting
}
Switch to sub-menu
}
Exit menu: <- Back
Rotate multifunction switch up or down
}
Switch menu entries or display potential values
Menu structure
The LC display has a max. five lines.
It displays information and navigates the menu.
The status of the supply voltage is displayed in the first line, followed by 4 lines containing
the menu levels.
Menu
Operating Manual SDD ES ETH
1003824-EN-06
Settings
Device History
Device Info
Device Event
Description
Information about I/O mapping on the connected
safety devices and about the network configuration
of the SDD ES ETH
Information about previous changes of state (en-
ables and guard locking) of a connected safety
device and status information
Information about the connected safety devices
Message on the change of state of a safety device
| 19
Advertisement
Table of Contents
