Table of Contents
Advertisement
SDD ES ETH
Setting
A name can be assigned to the safety device in Value.
Equipment
Identifier xx
GPIO
The current values at the GPIO are displayed and can be changed.
If the value is changed, select the new value in the value list.
}
Save changes
Changes can be saved using Save Settings. Once saved, the change is visible immedi-
ately in the display of the SDD ES ETH.
}
Export settings
The current setting can be saved as an HTML file.
Click on Export Settings. A DOWNLOAD LINK is displayed. Right-click on DOWNLOAD
LINK and save the file.
}
Import settings
Saved settings can be imported.
Click on Import Settings and select an HTML file with settings. The imported settings
must be saved using Save Settings in order for them to take effect.
Delete Events
}
Delete Events
The list of events can be deleted.
– Click on Delete.
– All Events will be deleted please confirm is displayed
Set new Password
A new password should be set after the SDD ES ETH is switched on for the first time.
}
Enter the old password in the Old Password field and enter the new password in the
New Password field.
Enter the new password again under Confirm new Password and click on Set Pass-
word.
Operating Manual SDD ES ETH
1003824-EN-06
Value range in
the Value field
Max. 16 charac-
ters (letters,
numbers and
special charac-
ters)
Click OK to delete all previous events.
Click Abort if no events are to be deleted.
Status
Status of change
Saved = Change was stored and adopted
| 26
Advertisement
Table of Contents
