SDD ES ETH
Process data exchange
The RJ45 interfaces on the internal autosensing switch enable process data to be ex-
changed with other Ethernet subscribers within a network.
The product SDD ES ETH can also be connected to Ethernet via a hub (hub or switch).
Operating Manual SDD ES ETH
1003824-EN-06
NOTICE
With the plug-in connection please note that the data cable and connector
have a limited mechanical load capacity. Appropriate design measures
should be used to ensure that the plug-in connection is insensitive to in-
creased mechanical stress (e.g. through shock, vibration). Such measures
include fixed routing with strain relief, for example.
Hub/Switch
Ethernet subscriber
Safety relay +
SDD ES ETH
with Ethernet
interface
Ethernet subscriber
PC
Safety relay +
SDD ES ETH
with Ethernet interface
Hub/Switch
| 15