Intended Use; System Requirements; Cpu Versions; System Software Versions - Pilz PSS SB DI16 Operating Manual

Intended use

The PSS SB DI16 is a decentralised input module which has been
designed for use as an "Input/Output Device"on SafetyBUS p.

System requirements

CPU versions

Before using the module on SafetyBUS p you must ensure that all the
safety systems accessing the module can in fact support it. This means
that all safety systems with Logic Device functionality which are assigned
to I/O-Group(s) on the PSS SB DI16, and the safety system with Manage-
ment Device functionality, must all support the module.
The PSS SB DI16 is supported by all SafetyBUS p-compatible safety
systems in the PSS-range, although on the PSS-types listed below, only
from the version number stated:
• PSS SB CPU from Version 1.3
• PSS1 SB CPU from Version 1.3
• PSS SB 3006 IBS-S PCP from Version 1.2
• PSS SB 3056 from Version 1.2

System software versions

The following system software is required in order to configure the module:
• PSS WIN-PRO from version 1.0.0
Operating Manual 3