Advertisement
Scope
The ONA-1000 platform base software includes software for the 400G module and supported Fiber Optics
modules (OTDR, etc.). The 100G module, for the ONA-1000, is upgraded separately. This procedure
addresses upgrade to the software for the ONA-1000, the 400G module and supported Fiber Optic modules.
To upgrade the ONA-1000 100G module, consult the "ONA-1000 100G software upgrade procedure".
There are three methods to update ONA-1000 software:
1. Network upgrade - Use this method to update your ONA-1000 via an Internet connection.
2. USB upgrade - Use this method to update your ONA-1000 with a USB thumb drive.
3. StrataSync upgrade - Use this method if your ONA-1000 is managed using Viavi's StrataSync
Asset Management system and your company has elected to deploy software via this method.
The ONA must be connected to AC Power, regardless of update method. Please note that network upgrades
are NOT supported over WiFi.
1. Network Upgrade
Step
Action
1.
Power On
2.
AC Power
3.
LAN Connection
4.
System
Technical Support
Details
Press and release the ON/OFF button to turn on the ONA-1000.
Connect the AC power adapter to the
power connector on the right side of the mainframe.
Connect the Ethernet Management
Port, on the right side of the mainframe,
to a network connection with internet
access, using CAT 5E or better cable.
Press the System icon,
System Menu.
tac@viavisolutions.com
, at the top of the start-up screen, to display the
1-844-468-4284 option 3, 1, 1
Page 2 of 14
Advertisement
