1. Scope
This document describes how to configure the OneAdvisor for ORAN ODU Emulation, including:
-
O-RU Connectivity
-
M-Plane Results
-
S-Plane Results
-
VSWR Results
The required products and parts to complete this procedure are as follows:
OneAdvisor with the following functions:
-
ONA-800 mainframe equipped with the following
module/Firmware/Licenses:
o SPA06MA-O: SPA Module with Optical Board
o Firmware version 4.2.1
o ODU-E Licenses
SFP+ for 10GBPS
Duplex Singlemode Fiber cable (potentially using the existing
cable that connects to the RU)
2. OneAdvisor Overview
The OneAdvisor is a portable instrument for Cell Site installation and maintenance, the main test functions
of OneAdvisor for cell site installation include:
-
Cable and antenna analysis up to 6GHz
-
Fiber Inspection verification and Fiber validation (OTDR)
-
Ethernet/VLAN testing
-
ODU Emulation
2.1
ORAN ODU Emulation
The following procedure describes the steps to perform ORAN ODU Emulation analysis with
OneAdvisor800. Successful results of this test prove that the radio is powered, connected, and ready to
communicate with the actual DU. If this process fails to reach that end, one can troubleshoot based on
what phase the process could/could not achieve.
Description
Page 2 of 14
Diagram
ONA Front View.
SM SFP+
Duplex SM Fiber