Lopi ProBuilder 36 CleanFace GSB2 Installation Manual page 60

60
5 Install the Convection Air Deflectors. The (2) deflectors must be installed prior to attaching the CoolSmart
kit. After removing the cover plates, install the deflectors as shown below.
Deflectors are installed here.
6 Insert a starter collar into each of the (2) holes that were uncovered in the previous step and bend the
tabs to secure the starter collar to the fireplace. Seal the joints with silicone caulk or aluminum (U.L.
181A-P) tape.
7 Install the fireplace into the framed chase.
© Travis Industries
Installation
(for qualified installers only)
11/9/20 - 1503
Note how the
deflectors points
downward to the
rear.
PB36 CF Install (Aust)