Gas Line Location - Lopi ProBuilder 36 CleanFace GSB2 Installation Manual

Gas Line Location

NOTE FOR RIGID PIPE: When using rigid pipe, you may wish to disconnect the shutoff valve from the fireplace
and route the pipe through the fireplace wall. First, disconnect the gas line from the shutoff valve. Disconnect
the shutoff valve from the cover plate (4 screws outside fireplace). The pipe may be routed through the cover
plate and the shutoff valve and gas line may be re-attached inside the fireplace.

Gas line must be plumbed to the left side. See illustration and table below to determine gas line location.

Fireplace accepts 1/2" MPT fitting.
Left Side Gas Pass-Through Location
b
a
© Travis Industries
Installation
(for qualified installers only)
a
7" (178mm)
11/9/20 - 1503
b
1-3/4" (45mm)
PB36 CF Install (Aust)
19