Factory Restore - HMS Networks Anybus Wireless Bolt CAN User Manual

Configuration
5.4

Factory Restore

Any one of these actions will restore the factory default settings:
• Clicking on Factory Restore on the System Settings page
• Executing Easy Config Mode 2
• Issuing the AT command AT&F and then restarting the unit
• Holding pressed for >10 seconds and then releasing it
Default Network Settings
IP Assignment
IP Address
Subnet Mask
Default Gateway
Internal DHCP Server
DHCP Interfaces
Default Bluetooth Settings
Operating Mode
Local Name
Connectable
Discoverable
Security Mode
Bluetooth LE
Default CAN Settings
Operating Mode
Bitrate
Ethernet protocol
Automatic Bus-off
TCP Mode
TCP Port
RX Filter
® ™
Anybus Wireless Bolt CAN User Manual
Static
192.168.0.99
255.255.255.0
192.168.0.99
Disabled
All
PANU (Client)
[generated from MAC address]
No
No
Just works
Operating Mode: Disabled
Connectable: No
Discoverable: No
On
250 kbps
Optimized
Off
Server
5005
Standard, ID 0x0, Mask 0x0 + Extended, ID 0x0, Mask 0x0
39 (46)
scm-1202-175 1.1 en-US