HMS Networks Anybus Wireless Bolt CAN User Manual page 17

Configuration
DHCP Interfaces
Start Address (Y)
® ™
Anybus Wireless Bolt CAN User Manual
The DHCP Interfaces function is available when Internal DHCP Server > DHCP Server
Enabled is selected.
All: By default, the DHCP Interfaces function is set to use all interfaces.
Wired Ethernet: The internal DHCP server only listens for clients on the wired Ethernet
interface.
Wireless Interfaces: The internal DHCP server listens for clients on all supported wireless
interfaces (WLAN/Bluetooth).
The internal DHCP server will assign up to 7 IP addresses starting from X.X.X.Y, where X
is taken from the current static IP address setting, and Y is the value in Start Address.
Already allocated addresses will be skipped, including the address of the unit itself. The
subnet mask setting will be ignored.
Examples:
IP Address: 192.168.0.99, Start Address: 101
DHCP range = 192.168.0.101 – 192.168.0.107
IP Address: 192.168.0.103, Start Address: 101
DHCP range = 192.168.0.101 – 192.168.0.108
7 addresses are allocated but the address of the unit is skipped.
15 (46)
scm-1202-175 1.1 en-US