Table of Contents
Advertisement
17.1.6
The Setup Desk Display Submenu
Various display fetures can be changed from this submenu. Press Setup, open the
Desk submenu and then open the Display submenu.
17.1.7
The Setup Desk Display LCDs Submenu – Adjusting the
LCDs
The two LCDs located on the front panel of the Event 4 can be configured to suit
different lighting conditions and viewing angles.
From the Display submenu, open the LCDs submenu to set the LCD displays
Time
Bright
Contr1
Contr2
Contr3
17.1.8
The Setup Desk Lamp Submenu – Adjusting the Desklight
level
The Event 4 can be fitted with optional gooseneck type desklights. The brightness of
the lights can be set in the Setup Desk Lamp submenu.
Press Setup, open the Desk submenu and open the Display submenu and move
the cursor to the Lamp field.
Lamp
17.1.9
The Setup Desk Video Submenu – Turning the VDU On or Off
The Event 4 can be fitted with optional SVGA type monitor.
Press Setup, open the Desk submenu, open the Display submenu, and move the
cursor to the Video field.
25/11/02
Set
LCDs Lamp Video
Disp +to|
15
On
Set
Time
Brightness Contr1 Contr2
LCD
5min
3
Sets the period of inactivity before the LCD backlighting turns off to
preserve the life of the displays. Can be set from 0 – 59 minutes
Sets the backlight level of all LCDs. 0 is the lowest level and provides
minimal backlight. 3 is the maximum backlight level
Sets the contrast of the left Assign master LCD. Can be set from 0 to 15
Higher contrast settings tend to make the LCDs more legible from a
lower viewing angle
Sets the contrast of the right Assign master LCD. (Event 416)
Sets the contrast of all Programmer LCD. (Event 408)
Sets the contrast of all Programmer LCD. (Event 416)
Set
LCDs Lamp Video
Disp +to|
15
On
Sets the desklight intensity. 0 is the lowest level and 15 is the maximum
desklight level
8
8
Draft
Software Version 5.0
Page 63
- Quick Links:
- Hardware Setup
Hide quick links:
Advertisement
Table of Contents
