Setup Prefs Ptimes - Setting Live Palette Fade Time; The Setup Backup Submenu - Jands Event 4 User Manual

JANDS – Event 4 Version 5 Users Manual
highest numbered Fixture is selected and its intensity is set to the Next Intensity
setting (default - 100%). These settings can be changed as follows
Prevint
Nextint
17.6.6 Setup Prefs PTimes – Setting Live Palette Fade Time
When the Palette buttons are used live it is possible to set a fade time so that any
changes fade in rather than snap. Changes made here apply to all Palettes but only
when the palette is set, in the Programmer LCD, to use time.
PTime

17.7 The Setup Backup Submenu

Press Setup and open the Bkup submenu to save and restore show data to and from
the disk drive. Backup is detailed in Section 6
Page 72
Sets the Intensity of selected Fixtures that are not highlighted.
(0 – 100%)
Sets the Intensity of the currently selected Fixture. (0 – 100%)
Set PrevInt NextInt Ptime
Prefs 15
The default setting is 1 second. Can be set from 0.01s 9M 59.9s
Revision 5.0.0.5
100 0:01.0
25/11/02