Aerotech AGV3D Series Hardware Manual page 8

Safety Procedures and Warnings
DANGER: Use of this product increases the risk of exposure to visible and/or invisible laser
radiation.
l
l
l
DANGER: High pressure air can cause severe injury.
l
l
l
WARNING: To prevent damage to the equipment and decrease the risk of electrical shock
and injury, obey the precautions that follow.
l
l
l
l
l
WARNING: Securely mount and position all system cables.
IMPORTANT: Carefully lift, move, and transport this product.
IMPORTANT: Fingerprints contain aggressive substances that can damage optical
surfaces. Wear clean, powder-free gloves when you handle optical components.
8
Do not stare into the laser beam, put your body parts in the laser area, or expose
yourself to reflections from powerful beams.
Wear certified laser safety eye protection.
Avoid eye or skin exposure to direct or scattered radiation.
Lock out the source and bleed off the pressure before you do service to the equip-
ment.
Wear eye protection.
Wear ear protection.
Only trained operators should operate this equipment.
Use this product only in environments and operating conditions that are approved
in this manual.
Make sure that the product is securely mounted before you operate it.
All service and maintenance must be done by approved personnel.
Keep the scan head free of foreign matter and moisture to prevent a reduction in its
performance and life expectancy.
AGV3D Hardware Manual
www.aerotech.com