Safety Procedures And Warnings - Aerotech AGV3D Series Hardware Manual

AGV3D Hardware Manual

Safety Procedures and Warnings

IMPORTANT: This manual tells you how to carefully and correctly use and operate the
AGV3D.
l
l
l
If you do not understand the information in this manual, contact Aerotech Global
Technical Support.
IMPORTANT: This product has been designed for light industrial manufacturing or
laboratory environments. If the product is used in a manner not specified by the
manufacturer:
l
l
DANGER: To decrease the risk of electrical shock, injury, death, and damage to the
equipment, obey the precautions that follow.
l
l
l
l
l
l
l
l
l
IMPORTANT: The protective ground connection of the AGV3D provides motor frame
ground protection only. Additional ground and safety precautions are required for
applications that require access to the AGV3D while it is energized.
www.aerotech.com
Read all parts of this manual before you install or operate the AGV3D or before you
do maintenance to your system.
To prevent injury to you and damage to the equipment, obey the precautions in this
manual.
All specifications and illustrations are for reference only and were complete and
accurate as of the release of this manual. To find the newest information about this
product, refer to www.aerotech.com.
The protection provided by the equipment could be impaired.
The life expectancy of the product could be decreased.
Electrical installation must be done by qualified personnel.
Before you do maintenance to the equipment, disconnect the electrical power.
Before you connect wires to this product, disconnect the electrical power.
Do not connect or disconnect electrical components, wires, and cables while this
product is connected to a power source.
Restrict access to the AGV3D when it is connected to a power source.
Make sure that all components are grounded correctly and that they obey the local
electrical safety requirements.
Supply each operator with the necessary protection from live electrical circuits.
Install the necessary precautions to supply safety and protection to the operator.
It is the responsibilty of the system integrator or qualified installer to determine and
meet all safety and compliance requirements when they integrate the AGV3D into a
completed system.
Safety Procedures and Warnings
7