Environmental Specifications; Table 1-2: Environmental Specifications - Aerotech AGV3D Series Hardware Manual

1.1. Environmental Specifications

1.1. Environmental Specifications
WARNING: Use this product only in environments and operating conditions that are
approved in this manual.
Table 1-2: Environmental Specifications
Ambient
Temperature
Humidity
Altitude
Vibration
Protection
Rating
Use
18
The optimal operating temperature is 20° C ±2° C (68° F ±4° F). If at any time the
operating temperature deviates from 20° C degradation in performance could
occur.
Storage: 0° to 40° C (32° to 104° F) in original shipping packaging
Operating: 20% to 60% RH
Storage: 10% to 70% RH, non-condensing in original packaging. The stage should be
packaged with desiccant if it is to be stored for an extended time.
Operating: 0 m to 2,000 m (0 ft to 6,562 ft) above sea level
Contact Aerotech if your specific application involves use above 2,000 m or below
sea level.
Use the system in a low vibration environment. Excessive floor or acoustical
vibration can affect system performance. Contact Aerotech for information
regarding your specific application.
The AGV3D is gasketed at critical interfaces to provide some protection from
contamination due to laser marking and cutting. Dust and fumes generated by the
laser machining process should be removed through exhaust or vacuum systems.
Failure to control this debris could result in rapid contamination of the cover glass
and damage to beam delivery optical components.
Indoor use only
AGV3D Hardware Manual
www.aerotech.com