Eu Declaration Of Incorporation - Aerotech AGV3D Series Hardware Manual

AGV3D Hardware Manual

EU Declaration of Incorporation

Manufacturer:
herewith declares that the product:
is intended to be incorporated into machinery to constitute machinery covered by the Directive 2006/42/EC as
amended;
and that the following harmonized European standards have been applied:
and further more declares that
This is to certify that the aforementioned product is in accordance with the applicable requirements of the
following Directive(s):
Authorized Representative:
Address:
Name
Position
Location
Date
www.aerotech.com
Aerotech, Inc.
101 Zeta Drive
Pittsburgh, PA 15238-2811
USA
AGV3D Scan Head
EN ISO 12100:2010
Safety of machinery - Basic concepts, general principles for design
EN 60204-1:2010
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
it is not allowed to put the equipment into service until the machinery into which it is to be
incorporated or of which it is to be a component has been found and declared to be in
conformity with the provisions of the Directive 2006/42/EC and with national implementing
legislation, for example, as a whole, including the equipment referred to in this Declaration.
EU 2015/863 Directive, Restricted Substances (RoHS 3)
Simon Smith, European Director
Aerotech Ltd
The Old Brick Kiln, Ramsdell, Tadley
Hampshire RG26 5PR
UK
Engineer Verifying Compliance
Pittsburgh, PA
2/26/2021
EU Declaration of Incorporation
/ Alex Weibel
13