baltur TBG 45 PN-V Manual User Instructions page 32

TECHNICAL SPECIFICATIONS
THERMAL CAPACITY
OPERATION
NOx EMISSIONS
MOTOR
ABSORBED ELECTRICAL POWER*
line FUSE
IGNITION TRANSFORMER
VOLTAGE
PROTECTION RATING
FLAME DETECTOR
NOISE**
AMBIENT TEMPERATURE OF OPERATION
WEIGHT
Natural Gas (G 20)
FLOW RATE
PRESSURE
STANDARD ACCESSORIES
BURNER COUPLING FLANGE
INSULATING GASKET
STUD BOLTS
HEXAGONAL NUTS
FLAT WASHERS
*) Total absorption at start with ignition transformer on and fan motor supplied at 50 Hz.
**) Noise levels measured in the laboratory of the manufacturer with burner running on test boiler, at maximum nominal thermal output.
TECHNICAL AND FUNCTIONAL SPECIFICATIONS
• Gas burner with low NOx and CO emissions in accordance
with "Class III" of the European standard EN676
• Two-stage progressive output operation.
• Ability to operate with output modulation by means of mounting
the automatic regulator (to be ordered separately with the
modulation kit).
• Modulation ratio 1:4.
• High fan output, low electrical absorption, low noise.
• Combustion head with exhaust gas recirculation which allows
extremely low polluting emissions with particular attention to
nitric oxide (NOx).
• Maintenance facilitated by the fact that the mixing unit can be
TBG 45 PN-V
MAX kW
MIN kW
Modulating / Progressive two stage
< 80 (Class III according to EN 676)
mg/kWh
kW
r.p.m.
kW
230 V
26 kV - 40 mA - 230/240 V - 50/60 Hz
1N ~ 230 V + 10% - 15% - 50/60 Hz
dBA
MAX ° C
MIN ° C
kg
MAX m³n/h
MIN m³n/h
MAX mbar
TBG 45 PN-V
removed without having to remove the burner from the boiler.
• Combustion air flow adjustment with closure of the shutter
when paused to prevent any heat dispersion to the flue.
• Adjustment of the number of revolutions of the fan when the
requests by the burner vary through a frequency converter
to obtain a noticeable reduction in noise and electricity
consumption (only in V version).
• Gas adjustment through the proportional working valve
controlled pneumatically.
• Possibility to integrate the burner with a kit for valve seal control.
• Equipped with 4 and 7 pole connectors, 1 flange and 1 insulating
seal for fixing to the boiler.
• Gas train exit possibility from upwards or from below.
4 / 26
0006081483_201512
TBG 60 PN-V
450 600
100 120
burner
0,50 0,75
2820 2800
0,71 0,98
4 A 4 A
IP 44
IONIZATION PROBE
73 75
40
- 10
42 44
45,3 60,3
10,1 12,1
360
TBG 60 PN-V
2 2
1 1
N° 4 M 12 N° 4 M 12
N° 4 M 12 N° 4 M 12
N° 4 Ø 12 N° 4 Ø 12