General And Commercial Information. Repair During The Warranty Period - UNIA FENIX G Operating Manual

Connect the turbine oil supply hydraulic line to one of the single-acting sockets on the tractor (see Fig. 3).
Mark the type of the socket that is in the free oil return line to the tractor oil tank (screw connection,
connector with valve ...). Check that there is no pressure remaining in the oil return line in order not to interfere
with the good operation of the turbine.
CAUTION:
The return line MUST be connected to the tractor tank = FREE RETURN, before starting the
turbine! Releasing the free return line during operation may damage the turbine motor.
CAUTION:
Work with the unit should be performed with links of the tractor in the floating
position.
CAUTION! Correct operation of the tractor requires an efficient internal hydraulic system and the correct oil
level – near the upper level marking.
✓ Check the operation of individual mechanisms and drive systems
✓ Connect the air system and electric installation to the tractor
✓ Check the operation of individual mechanisms and drive systems
✓ Check the operation of the electrical installation and air system
X. GENERAL AND COMMERCIAL INFORMATION. REPAIR DURING THE WARRANTY
PERIOD.
In case of any problems or doubts with the maintenance and operation, please contact the authorized vendor
or the manufacturer's Sales Department. The vendor is obliged to enter the tasks performed during the warranty
period into the warranty card. Read the User Manual thoroughly before starting the machine for the first time
and follow the safety instructions contained in it!
The device is intended only for common use, for pre-sowing soil cultivation and sowing seeds as indicated in the
User Manual (see sowing chart). In the case of sowing seeds other than those indicated in the instructions,
contact the manufacturer in order to determine, if the machine can be used for this purpose. The usage other
than in compliance with the above-mentioned method is treated as incompatible with the intended use. The
manufacturer is not liable for damages resulting from such usage, only the user bears the risk.
Intended use also includes compliance with the conditions of use and maintenance of the machine in good
condition and using only genuine spare parts specified by the manufacturer.
The unit may only be used, maintained and kept in a proper condition by people familiar with its maintenance
and informed about the hazards.
FENIX G Operating manual
Fig. 3 Hydraulics connection.
- page 13 -