Storage Of The Machine; Disassembly And Disposal; Warranty Conditions And Warranty Services - UNIA HARRIER Operating And Maintenance Manual

5.7 Storage of the Machine

Clean the machine from soil each time after finishing work and then inspect all parts and
assemblies. Replace any worn or damaged parts with new ones. Tighten any loosen screw
connections. Store the machine on hardened surfaces.
After the season:
• clean the machine thoroughly
• lubricate the machine at the specified lubrication points
wash faces of the coulter discs, rollers and hitch axle pivots with kerosene and protect them
•
against corrosion applying grease with brush
• repair spot defects of the paintwork by repainting
•
when the machine is to be stored outdoors in winter – disassembly the hydraulic
cylinder together with the hoses and keep them in a dry, well ventilated and possibly
darkened room

5.8 Disassembly and Disposal

After its working life, the cultivator is to be scrapped. Disassembly should be performed by a
specialized company.

5.9 Warranty Conditions and Warranty Services

Agricultural machinery is warranted to the provisions specified in the Instruction Manual for proper
operation and maintenance. Under the warranty period, only the genuine parts made by 'UNIA'
Grudziądz may be used.
Any modifications or repairs made by the user are not allowed in the warranty
period. This may lead to loss of warranty. For more detailed information on how
to file a complaint, see the Warranty Card attached to each machine together
with its Operating Manual.
The warranty services are performed by: the supplier (dealer) entered to the Warranty Card when
buying the machine.
OPERATING AND MAINTENANCE MANUAL HARRIER
- 23 -