The FENIX G unit is designed for row sowing of grass seeds and regeneration of meadows. It can also be
used for row seeding of other types of seeds (see sowing chart) with parameters defined by the machine
specification.
1.1.
Technical data
Working width [m]
Tank volume [dm
Transport width [m]
Coulter quantity
Coulter type
Minimum power demand [PH]
Weight of weights - standard
Weight of additional weights
Weight [kg] (without additional weights)
Seed coulters
Row spacing
Dispenser drive
Turbine drive
Type of distributor
2. CONSTRUCTION AND OPERATION
2.1. Main Assemblies of the seed drill.
The seed drill consists of the following assemblies (see Fig. 4 below):
FENIX G Operating manual
3
]
- page 15 -
Fenix G
3
1000
3
24
disc
140
420 kg
300 kg
2900
32
90mm.
Electric / mechanical
Hydraulic 24l / min.
Plastic, 32 outlets