General Guidelines On Safety And Accidents Prevention - UNIA FENIX G Operating Manual

C.2.23
Do not touch the machine
components until all
assemblies are at standstill.
WARNING:
Danger of getting your hand caught by the agitator!
IV. GENERAL GUIDELINES ON SAFETY AND ACCIDENTS PREVENTION
General rule:
Check the technical condition of the unit before each use of the machine
1. In addition to the instructions in this manual, the generally accepted safety and accident prevention
regulations must also be observed.
2. Do not allow unauthorized people (children), who are not familiar with its intended use and operation
to operate the machine.
3. The unit may only be operated by an operator who has read this Operating Manual.
4. Working without guards of the mechanisms, riding on the unit and its drawbar, as well as driving the
unit without brakes is prohibited.
5. Entering the loading box is forbidden during work and transport.
6. It is forbidden to exceed the permitted speed of the unit.
7. Leaving the unit on slopes and inclinations without braking and protecting the wheels (by placing
wedges) is forbidden.
8. Staying within the machine's operating range is forbidden. Keep at least 6m distance away from the
moving machine.
9. Exceeding the permissible speed may damage the machine and cause an accident.
10. It is forbidden to load or unload the unit, if it is not coupled with the tractor.
11. Do not leave any objects or tools inside the loading box.
12. When sowing the treated seeds, the worker operating the unit should wear a tight suit in order to be
protected against the harmful effects of dust.
FENIX G Operating manual
B.2.12.
Do not reach into or step
into the container of the
machine while the engine is
running!
- page 9 -
C.2.20.
Do not open or remove
safety devices while the
engine is running!
C.2.11.
Danger of getting caught
on the PTO shaft. Keep
away from moving parts.