Noise And Vibrations; Hydraulics; Maintenance - UNIA FENIX G Operating Manual

Seed drill
Table of Contents

Advertisement

13. It is unacceptable to perform mechanical loading using the universal loader, if there is somebody staying
in the area of its operation.
V. NOISE AND VIBRATIONS
The sound pressure level is 77 dB (A). It is measured at the operator's ear level during operation. The
tractor's cabin should be closed. During operation with the unit, the operator should be in the tractor cabin or
wear hearing protectors.
When working with the unit, there are no risks caused by vibrations because the operator works in the
tractor's cabin where the seat is amortized and appropriately ergonomically shaped. The value of vibrations
acting on the operator's body does not exceed 0.6 m/s
VI.

HYDRAULICS

1.
The hydraulic system is under high pressure!
2.
When connecting the hydraulic cylinder and the motor, pay attention to the correct connection of the
hoses.
3.
In the case of hydraulic connections between the tractor and the machine, mark the plugs of the quick
couplers in order to exclude improper operation.
The opposite function (e.g. lifting / lowering) will occur when changing connections - risk of damaging
the machine!
4.
Regularly check the hydraulic hoses and replace them when worn or damaged. New cables must comply
with the technical requirements of the device manufacturer!
5.
6.
Before starting work on the hydraulic system, reduce the oil pressure in the system to zero and turn off
the engine!
VII.

MAINTENANCE

FENIX G Operating manual
2
.
Liquids escaping under pressure (hydraulic oil) can penetrate
the skin and cause serious injuries!
In case of injury, consult a doctor immediately! Danger of
infection!
- page 10 -

Advertisement

Table of Contents
loading

Table of Contents