Table of Contents
Advertisement
As part of these activities, the user should, at the time of the replacement and scrapping of parts
and assemblies or the liquidation of the entire unit:
preserve and store in the warehouse parts that are still suitable for further use
transfer the scrapped metal parts to the scrap collection agents
products made of cardboard, paper, plastics, rubber, etc. should be transferred to
the recyclable material purchasing agents
hand over the used oil to the companies carrying out the collection of used oils and
lubricants, or follow local regulations regarding waste management for environmental
protection
12. Responsibilities of the Manufacturer
The manufacturer shall not be liable if the machine is operated contrary to the law, safety regulations
or recommendations of this manual. Due to the fact that during the operation of the machine, there
may be situations not provided for herein, the user should always follow the general safety rules.
The manufacturer's responsibility is excluded in the event of arbitrary use on the machine other than
original spare parts or parts approved by the manufacturer.
The manufacturer's responsibility shall be excluded in the event of not authorized use in the machine
spare parts other than original or parts other than approved by the manufacturer.
The manufacturer shall not be liable for indirect damages, including damage to other machines or
equipment.
The manufacturer's liability shall not cover improper (or departing from the expected) results of work,
if any section of this manual or the operating manual of the attached machine is not observed. The
owner of the machine is responsible for its operation and maintenance.
The owner of the machine is responsible for the appropriate qualifications of operators and their
knowledge of how to operate the machine and rules of its operation.
Remember that improper operation of the machine poses a risk to people, animals, water reservoirs
and arable fields. Always follow the instructions of manufacturers of machines and equipment, seeds
as well as plant protection products and fertilizers contained in specialist instructions.
NOTE!
OTHER DESIGN SOLUTIONS ARE ALLOWED, WHICH DO NOT NECESSITATE THE CHANGE OF THIS
MANUAL
13. Warranty Terms and Conditions
Warranty terms and conditions are included in a separate document, Warranty Card, attached to the
machine.
14. Additional Information
20
Advertisement
Table of Contents
