MG HS PHEV Manual page 337

Failure to do this will invalidate the Anti-Corrosion
Warranty. If in doubt, ask your MG Authorised Repairer.
Removing tar spots
Use white spirit to remove tar spots and stubborn grease
stains from the paintwork. Then wash the area immediately
with soapy water to remove all traces of the spirit.
Polishing the Paintwork
DO NOT use car polish containing coarse
abrasives – these will remove the paint film
and damage the gloss finish.
Occasionally treat the paint surface with an approved polish
containing the following properties:
• Very mild abrasives to remove surface contamination
without removing or damaging the paint.
• Filling compounds that will fill scratches and reduce
their visibility.
• Wax to provide a protective coating between the paint
and the elements.
MAINTENANCE
Note: If possible, avoid applying polish or wax
products to window glass and rubber seals.
Wiper Blades
Wash in warm soapy water. DO NOT use spirit or petrol
based cleaners.
Windows and Mirrors
Regularly clean all windows, inside and out, using an
approved glass cleaner.
Windscreen: In particular, clean the outside of the screen
with glass cleaner after washing the car with wash and wax
products, and before fitting new wiper blades.
Rear screen: Clean the inside with a soft cloth, using a
side to side motion to avoid damaging the heating elements.
DO NOT scrape or use abrasive cleaners – this will damage
the heating elements.
Rearview mirrors: Wash with soapy water. DO NOT use
abrasive cleaning compounds or metal scraper.
6
321