Table of Contents
Advertisement
EMERGENCY INFORMATION
Front Fog Lamp Bulb Renewal
1 Disconnect the battery negative terminal.
2 Safely raise and support the front of the vehicle with
suitable support equipment. DO NOT work under a
vehicle that is only supported by a scissor or trolley
jack.
3 Remove the bottom deflector.
4 Rotate the bulb holder anti-clockwise and remove.
286
5 Remove the wiring connector from the bulb holder.
6 Refit the wiring connector to the new bulb holder.
7 Locate the bulb holder in the lamp, rotate clockwise
until fully secured.
8 Fit the bottom deflector.
9 Connect the negative battery terminal.
10 Test lamp operation.
Advertisement
Table of Contents
