Table of Contents
Advertisement
STARTING & DRIVING
Unless necessary, it is not recommended to
press the unlock button during gear shifting.
This may cause incorrect gear selection and
subsequently damage the drivetrain.
The Electronic Shift Lever defaults to the middle
steady-state. The forward and backward positions are
non-steady states.
Transmission Gears
DO NOT move the shift lever to N in order to
coast whilst driving.
During driving, DO NOT move the shift lever
from D to R or P position, severe damage to
the electric drive transmission or an accident
can occur.
• P: Park
In this position, the electronic parking brake is applied.
To release the electronic parking brake, refer to
"Electronic Parking Brake (EPB)" in "Brake System"
section.
174
If any gear other than P is selected and the vehicle
speed is below 1.2 mph, Park can be engaged using the
following procedure:
1 Press the P button to engage P gear;
2 Turn off the START/STOP switch and the vehicle
engages P gear automatically.
3 With the brake pedal released and the driver's seat
belt unfastened, when opening the driver's door the
vehicle engages P gear automatically.
• R: Reverse
Select this gear only when the vehicle is stationary and
the engine is running at idle speed.
With the brake pedal depressed, press and hold the
UNLOCK button, push the shift lever forward to the
end, the vehicle engages R gear.
• N: Neutral
Select this gear when the vehicle is stationary (for
example, waiting for traffic lights).
Whilst in P gear, with the brake pedal depressed,
press and hold the UNLOCK button, push the shift
Advertisement
Table of Contents
