Table of Contents
Advertisement
The conditions for activating the lane change assist function
include:
1 Rear driver assistance system is in the ON state and
no faults are present in the system.
2 Lane change assist (LCA) function is enabled.
3 The vehicle speed is above 20mph.
4 The speed of the approaching vehicle is higher than the
speed of your vehicle.
5 The approaching vehicle enters the detection area of
the LCA, the monitored areas are 7m - 70m behind
your vehicle and 4.7 m to the side of your vehicle.
6 The approaching vehicle is likely to have a collision with
your vehicle within 3.5 seconds.
STARTING & DRIVING
Rear Cross Traffic Alert (RCTA)
When the vehicle is reversing, the system will monitor
vehicles approaching from the left and right rear. When
the conditions for activating RCTA function are met,
the warning lamps on the corresponding side will
illuminate, simultaneously a warning triangle icon for the
corresponding side will be displayed in the infotainment
screen to alert the driver to the situation.
4
215
Advertisement
Table of Contents
