Av Unit Mounted Video Table W/ V-Leg - tayco Halifax Installation Manual

AV Unit Mounted Video Table, w/ V-Leg
Place the worksurface on a
1.
clean, solid surface or floor
with the underside facing
up.
Position the V-leg on
2.
underside of worksurface.
Attach the V-Leg by
inserting (18) #10 x 1" Pan
Head Screws into the pre-
drilled holes and tighten,
(Figure 1).
Repeat Step 2 to fasten
3.
remaining V-leg.
4. Position the Table Support
Beam on underside of
worksurface using the pre-
drilled positioning holes.
Attach the Table Support
Beam to worksurface
using the #10 x 1" Pan
Head Screws, (Figure 2).
Continued on the next page >>
January 2021
3
WORKSURFACE
1
V-LEG
2
TABLE SUPPORT BEAM
3
Drill Robertson # 2
Halifax
1
1
Pilot Hole
8540-0789_SCREW
#10 X 1" Pan Head
Screw
2
Pre-drilled holes
2
Figure 1
Figure 2
Page 4