tayco Halifax Installation Manual page 39

Gallery Wall and Accent Shelf
Drill wall through markings
4.
using 1/2" diam. Drill Bit; insert
toggle bolts in holes, (Figure 3);
adjust the toggle bolt in the
wall.
Break open the plastic adjuster
5.
remained outside the wall,
(Figure 4); remove excess
material from the adjuster so
that it will be flat.
Secure the Gallery Wall Backer
6.
Bottom using #8 x 2" Flat Head
Screws, (Figure 5); make sure
the Gallery Wall Backer Bottom
are level and plumb.
Continued on the next page >>
January 2021
Figure 3
1
6" X 6" GALLERY WALL FIXTURE
1
GALLERY WALL BACKER BOTTOM
2
TOGGLE BOLT
3
#8 X 2" FLAT HEAD SCREWS
4
Drill Tape Measure
4
Robertson # 2 1/2" Ø Drill Bit
Halifax
Figure 4
2
1
4
Figure 5
Tools & Hardware Needed
Toggle Bolt #8 X 2" Flat Head
Screw
Page 36