tayco Halifax Installation Manual page 9

AV Unit Mounted Video Table, w/ V-Leg
Securely fasten AV Unit
8.
Mounted Video Table to
flush plates using #10 x 1"
Pan Head Screws, (Figure 5).
Install the wire guide to V-
9.
leg, please refer to wire
guide and plastic cover
installation for V-leg.
Note: Install the wire guide
to V-leg near the Table
Support Beam.
Set the power grommet into
10.
the hole; lay-in the electrical
wires and communication
cables inside wire troughs or
guide.
January 2021
POWER GROMMET
7
WIRE GUIDE
8
PLASTIC COVER W/ MAGNETS
9
Drill Robertson # 2
Halifax
5
4
4
7
Tools & Hardware Needed
Tape Measure Torpedo Level
4
Figure 5
8
9
Figure 6
8540-0789_SCREW
#10 X 1" Pan Head
Screw
Page 6