tayco Halifax Installation Manual page 40

Gallery Wall and Accent Shelf
7. Position and align the edges
of the Gallery Wall Backer
Top with the edges of the
Gallery Wall Backer Bottom;
mark the location of Gallery
Wall Backer Top and wall
through holes in the gallery
Wall Backer Top using 3/16"
diam. drill bit, (Figure 6).
Note: Make sure the side
with the holes for Accent
Shelves are facing up.
Set aside the Gallery Wall
8.
Backer Top.
Follow Steps 4 & 5.
9.
Connect the Gallery Wall
10.
Backer Top to Gallery Wall
Backer Bottom by inserting
the Wooden Dowels into the
holes of the Gallery Wall
Backer Top; press the boards
together, (Figure 7).
Continued on the next page >>
Drill
January 2021
GALLERY WALL BACKER BOTTOM
2
WOODEN DOWEL
5
GALLERY WALL BACKER TOP
6
Robertson # 2 Tape Measure
Hole for Accent Shelf
Hole
5
3/16" Diam. Drill Bit 1/2" Diam. Drill Bit
Halifax
6
6
5
Tools & Hardware Needed
8540-0631
Toggle Bolt
2
Figure 6
2
Figure 7
8540-0770_Dowel
Wooden Dowel
Page 37