Symbols On Product Labels - Planmeca ProMax 2D User Manual

1 Introduction

1.2 Symbols on product labels

2 Planmeca ProMax
NOTE
The User's Manuals are available on Planmeca's website.
• For X-ray units, select Material bank > Manuals > Imaging.
• For software products, select Material bank > Manuals > Software.
Fulfils the requirements of Directive 93/42/EEC.
SGS listing marking according to US and Canadian standards (ANSI/AAMI
ES60601-1 and CAN/CSA C22.2 No. 60601- 1).
Date of manufacture (Standard ISO 7000).
Type B applied part (Standard IEC 60417).
Separate collection for electrical and electronic equipment according to
Directive 2002/96/EC (WEEE).
Refer to instruction manual/booklet (Standard ISO 7010).
Emergency stop (Standard IEC 60417)
Warning: Electricity (Standard ISO 7010).
To avoid risk of electric shock, this equipment must only be connected to a
supply mains with protective earth.
Electrostatic sensitive device (Standard IEC 60417)
Warning, hot surface (Standard ISO 7010).
User's manual