RESEARCH CONCEPTS RC2000A DUAL AXIS Instructions Manual page 49

RC2000A Dual Axis Antenna Controller
Note that to obtain access to the Azim Fast Deadband and Elev Fast Deadband CONFIG mode items
the controller's Az/El Drive Options Enable CONFIG mode item must be set to 1 and the Expert Access
Flag must be set.
AZIM FAST DEADBAND:2000
175-5000 MSEC
ELEV FAST DEADBAND:2000
175-5000 MSEC
AZIM SLOW DEADBAND: 800
175-5000 MSEC
ELEV SLOW DEADBAND: 800
175-5000 MSEC
The AZIM CW Limit CONFIG mode item allows setting on Azimuth CW Limit count value. Setting the
Azimuth CW Limit CONFIG mode item also initializes the Azimuth CCW Limit to 30. Normally these
limits are set via LIMITS mode. The Azimuth Position count is normally set to 30 when the Azimuth
CCW Limit is set via LIMITS mode.
AZIM CW LIMIT:_ 214
30-65535
The AZIM Position Cnt CONFIG mode item allows setting the current antenna Azimuth position to a
specific position count value.
AZIM POSITION CNT:_ 168
30-65535
The ELEV Up Limit CONFIG mode item allows setting an Elevation Up Limit count value. Setting the
Elevation Up Limit CONFIG mode item also initializes the Elevation Down Limit to 30. Normally these
limits are set via LIMITS mode. The Elevation Position count is normally set to 30 when the Elevation
Down Limit is set via LIMITS mode.
ELEV UP LIMIT:_ 210
30-65535
The ELEV Position Cnt CONFIG mode item allows setting the current antenna Elevation position to a
specific position count value.
ELEV POSITION CNT:_ 173
30-65535
Research Concepts, Inc. • 5420 Martindale Road • Shawnee, Kansas • 66218-9680 • USA
Chapter 4
CONFIG
ENT,BKSP,SCRLL ^v
CONFIG
ENT,BKSP,SCRLL ^v
CONFIG
ENT,BKSP,SCRLL ^v
CONFIG
ENT,BKSP,SCRLL ^v
CONFIG
ENT,BKSP,SCRLL ^v
CONFIG
ENT,BKSP,SCRLL ^v
CONFIG
ENT,BKSP,SCRLL ^v
CONFIG
ENT,BKSP,SCRLL ^v
Modes
www.researchconcepts.com
49