RESEARCH CONCEPTS RC2000A DUAL AXIS Instructions Manual page 34

34 RC2000A Dual Axis Antenna Controller
8. If desired, enable the AutoPol feature to slave the controller's polarization control output to a
satellite receiver. A digital output on the receiver must be connected to the AutoPol input of the
controller and the AutoPol feature must be enabled via CONFIG mode.
9. Enable simultaneous azimuth and elevation movement in AUTO mode if the total combined current
draw from both actuators is less than 8 amps over all operating conditions///////.
Research Concepts, Inc. • 5420 Martindale Road • Shawnee, Kansas • 66218-9680 • USA
Chapter 3 Installation
www.researchconcepts.com