Angelo Po 191FAG Use And Installation Manual page 52

REPLACING THE TOP BURNER PILOT LIGHT NOZZLE
To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Pull off the knob (A).
3 - Undo the screws (C) and remove the control
panel (B).
4 - Remove the pipe (D).
5 - Remove the nozzle (E) and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
6 - Replace the pipe (D), the control panel (B) and
the control knobs (A).
REPLACING OVEN BURNER PILOT LIGHT NOZZLE
To carry out this operation, proceed as fol-
lows.
1 - Access the pilot light through the opening
provided in the bottom of the appliance.
2 - Unscrew the cap (B).
3 - Remove the nozzle (C) and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
4 - Replace the cap (B).
IT
GB
DE
REPLACING OVEN BURNER AIR BUSHING
To carry out this operation, proceed as follows.
FR
1 - Turn off the gas supply tap.
2 - Undo the screws (B) and remove the control
ES
panel (A).
3 - Undo the screw (C).
4 - Extract the bushing (D) and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
5 - Replace the control panel (A) on completion of
the operation.
English
C
A C B
A
- 24 -
D E
10
IDM-39614602800.tif
C
B
IDM-39614602900.tif
B
C
D
IDM-39614603000.tif