6 POINT I/O Synchronous Serial Interface Absolute Encoder Module
Additional Resources
Refer to POINT™ I/O 5V and 24V Encoder/Counter Modules User Manual,
publication 1734-UM006, as needed.
If you would like a manual, you can:
•
download a free electronic version from the internet:
http://www.rockwellautomation.com/literature/
•
purchase a printed manual by contacting your local Allen-Bradley distributor or
Rockwell Automation representative.
About the Module
You can use this Series C module with DeviceNet and PROFIBUS adapters. If you are
using RSLogix 5000 software, version 11 or higher, you can also use the Series C modules
with ControlNet and Ethernet adapters.
This module collects serial data from industrial absolute-position encoding sensors that
use standard SSI protocol. You insert the module into a POINT I/O terminal base that
provides common power, communication, and wiring connections for the SSI sensors.
Use this diagram to identify the external features of the module.
Publication 1734-IN581E-EN-E - October 2015