Unpacking; Note For Introduction; Introduction; Disclaimer - BVM PNP VIPER Construction And Operating Manual

UNPACKING

If the box is damaged on the outside, take photos. Damage claims must be filed within 7
days.
Use a sharp knife or razor blade to cut the clear tape away that would allow the box top to be
lifted free. Notice that the inner box is protected with 1/8" plywood.
If the carrier is present when you except the product and if there is obvious external damage
to the box, note such on the acceptance paperwork and have she or him make appropriate
notes on their paperwork.

NOTE FOR INTRODUCTION

This manual reflects procedures necessary to get an early prototype model ready for flight.
You may see that your production Viper Jet has some of these procedures accomplished at
the factory. NOTE: The Viper Jet requires both Metric and S.A.E. Hex drivers. Check BVM
website for updates and addendums to this manual.

INTRODUCTION

Thank you for purchasing the BVM PNP Viper Jet. This model represents the latest in
manufacturing technology and completion for the R/C jet enthusiast. The factory has expertly
crafted and thoroughly inspected all aspects of the model. Only a small amount of work is
required to complete the assembly of your Viper Jet.
This manual contains instructions for safety, operation and maintenance. It is essential to
read and follow all of the instructions and warnings in the manual.
Please review the entire manual to become familiar with the processes and procedures
before you begin to assemble your aircraft.

DISCLAIMER

BVM assumes no liability for the operation and use of these products. The owner and
operator of these products should have the necessary experience and exercise common
sense. Said owner and operator must have a valid Academy of Model Aeronautics license
and a "Turbine Waiver" for operation in the U.S.A.
This is a sophisticated jet model aircraft. It must be operated with caution and common sense
and requires some basic mechanical ability. Failure to operate this product in a safe and
responsible manner could result in injury or damage to the product or other property.

Notice:

Do not use with incompatible components or alter this product in any way outside
of the instructions provided here. The BVM Viper Jet has been designed and flight tested with
80-100N class engines. Damage to the aircraft may result from exceeding this thrust
limitation (23 lbs).
BVM®2017 3 06/20/2017