Table of Contents
Advertisement
Make the (4) electrical connections. Note that
they can only be plugged into the proper
receptacles by physical design.
Hand twist the Silver, Gold, and Blue
threaded couples together. Turn only the
ends that can swivel to avoid kinking the
tubing on the female end.
Use a 3mm Hex driver to secure wing to the
fuse pegs, (2) forward and (2) aft.
The bolts are 3mm X 13mm S.H.C.S.
BVM®2017
FLAPS - A plywood Flap Gauge is
provided. Position it on top of the wing
adjacent to the fuse joint.
30 Take Off Flaps
17
06/20/2017
Advertisement
Table of Contents
Need help?
Do you have a question about the PNP VIPER and is the answer not in the manual?
Questions and answers