Unpacking; Carbon Dowel Preparation - BVM Go Fly Gold Bandit Evo Assembly And Operating Manual

UNPACKING

Carefully remove items from the box. Open each package and inspect for shipping
damage. After reading this entire manual, get familiar with the major kit components.
Note: Damaged parts must be reported to BVM within 7 days of receiving your kit.
Become familiar with the work completed at the factory. It is important that you inspect and
approve this work now.
Using a stand, such as the BVM General Purpose Jet Foam Cradle (PA-SR-0080) will aid
in the assembly of the Bandit Evo.

Carbon Dowel Preparation

Use BVM Dry Lube (BVM# 1947) on
the Carbon Rods to allow easier
installation into the wing and tail
receptacles.
BVM ® 2018
Bandit Evo
Assembly & Operation Manual
4 02/27/2018